Product introduction:
Gongda Laser launched an ultra fast picosecond ultraviolet fiber laser, which adopts an integrated design and compact design, and can bring fast and low-cost integration to integrators. Proprietary cavity design can maintain superior power stability and reliability. The power range is 3W-30W, which can meet most requirements of customers for ultraviolet picosecond lasers.
Product features
1. Wide coverage of repetition frequency (10-6000kHz);
2. Superior beam quality (M ²< 1.5)；
3. The pulse width is less than 700ps, and the processing is more refined, and the heat affected zone is smaller;
4. Integrated design, convenient for equipment integration.
Product application
1.Solar cell silicon wafer cutting
2.Non carbonization cutting of PI film, LCP, etc
3.Irregular cutting of FPC window and PCB
4.Glass, sapphire, OLED cutting
Technical parameter
| NO. | Characteristic | Unit | SHARP-PINO-3/5/10/15/20/30/35/40 |
| 1 | Mode of Operation | - | Pulse |
| 2 | Polarization State | - | Linear |
| 3 | Wavelength | nm | 355 |
| 4 | Duration of the Each pulse in the Burst | ps | <700 |
| 6 | Polarization Ratio | dB | >20 |
| 7 | Nominal Average Output Power | W | 3 | 5 | 10 | 15 | 20 | 30 | 35 | 40 |
| 8 | pulse energy | uJ | 10 | 10 | 10 | 15 | 20 | 20 | 20 | 20 |
| 9 | Pulse Burst Repetition Rate | KHz | 10-1000 | 10-3000 | 10-3000 | 10-6000 | 10-6000 | 10-6000 | 10-6000 | 10-6000 |
| 10 | RMS Power Stability | % | ±1.5 |
| 11 | Beam Quality (M2) | | <1.5 |
| 12 | Beam Diameter | mm | 2.0 |
| 13 | Beam Circularity | % | >90 |
| 14 | AVC | V | 220 |
| 15 | Maximum power consumption | KW | 0.4 | 0.4 | 0.6 | 0.8 | 0.8 | 0.8 | 0.8 | 0.8 |
| 16 | Cabinet size | mm | 700*306*161 |
| 17 | Cooling mode | | Water-cooling |
Product size
Product Tags:
|
|
UV Picosecond Pulse Fiber Laser 3W 5W 10W 15W 20W 30W 35W 40W Images
|
